-
Submersible pump unit for vertical wet well installation and pumping wastewater with maximum sized particles of 20 mm. Pump in alternating current version with a vortex impeller, horizontal or vertical discharge port and optional pressure switch. Motor with thermal motor monitoring and 10 m of connection cable with plug.
-
Drainage of clear or slightly dirty water, for domestic use
Lifting of waste water even with suspended solids, for domestic use
-
– Pump installation in vertical position with horizontal delivery port.
– Pumps are delivered with elbow for vertical delivery port.
– Pressure Port: G1½(“)
– Cable length: 10m
– Protection class IP68 (up to 5 meters immerged)
– Temperature range: +5 to +35°C
– Maximum number of starts per hour: 60
– Density of the fluid: 1 to 1.06 Kg/dm³
– PH of the fluid: 6 to 8
– Minimum pumping level: Drain/Waste – 20 mm / 40 mm
– No non return valve
-
– Flow: upto 235 LPM
– Head: upto 8 mts
– Power: upto 0.75 kW (1hp)
– Voltage: 230 V
– Phase: Single
– Max. immersion depth: 5 m
Material of Construction:
– Pump housing: PP
– Impeller: PA6 GF30
– Shaft: AISI 416
– Motor housing: Fe 370 Galvanized
