-
Taro Non-clog Sewage Pumps are manufactured using high quality raw materials and components using state-of-the-art manufacturing facilities and will give trouble-free performance if they are properly installed and maintained. The Non-clog Sewage Pumps are centrifugal pumps with inbuilt self-priming mechanism. After installation, once the pump casing is filled initially with the pumped liquid, the pump is ready to use. The specialty of such pumps is that they permit the pumping out of mud, dirt, and suspended solids. These pumps are suitable for handling water and noncorrosive liquids.
-
– Pumping of sewage and effluents in Bungalows, Apartments, Office
– Public buildings, Schools, Hotels, Restaurants and Hospitals.
– Water recycling plants Pumping of surface rain water Dewatering of trenches and pits
-
» Easy installation and low operating cost.» Improved efficiency and minimal maintenance by having the set operated on a common shaft.» Efficient self priming action without foot valve designed for quick air release.» Non-clogging open type impeller for handling suspended solids.» Dynamically balanced rotors and impellers ensure vibration free performance and enhanced life.» Aluminium pressure die-cast rotors press-fitted onto precision-machined motor shafts.» Accurate control on the uniformity in air gap to minimize vibration. » Deep groove ball bearings packed with right quantity of special grease ensure long life. » Durable and easy maintenance » Squirrel-cage motor of TEFC type designed to operate in a wide voltage variation 200 – 240 V, 50 Hz, AC power supply -
Phase and Power Single Phase – 2 Pole:
1.0, 2.0 HP Three Phase – 2 Pole:
1.0, 2.0, 3.0 HP Three Phase – 4 Pole:5.0 HP
Motor Type Dry Starting method Single phase : CSR Three phase : DOL Operating Voltage Single phase : 350 – 440 V Three phase : 180 – 240 V Frequency 50 Hz Speed 2P: 2850 rpm 4P: 1440 rpm Duty S1 Continuous Insulation Class Refer name plate Max.
Fluid Temperature 330C Impeller Type Semi Open Type of Enclosure TEFC Thermal Overload Protection (TOP) Provided for Single-phase pumps
